SP-1622P

18-port Gigabit Uplink PoE Fiber Switch

The sp-1622p is an unmanaged PoE fiber switch. It has 16*10/100M PoE ports and 2*10/100/1000M uplink RJ45 ports and 2*1000M uplink TP/SFP combo ports. Port 1-16 can support IEEE802.3af/at standard PoE power supply, and single-port PoE power reaches 30W. The maximum PoE output power is 250W. As a PoE power supply device. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through a network cable, and meet the network environment that needs a high-density PoE power supply. It is suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises.

Category:

Key Features

 

  • 10/100Mbps access, gigabit (TP/SFP) combo port uplink
    • All series supports “10/100M RJ45 port and gigabit TP/SFP combo port” combination, which enables users to flexibly build networking to meet the needs of various scenarios.
    • Support non-blocking wire-speed forwarding.
    • Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

 

  • Smart PoE power supply function
    • 16*10/100Base-TX RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
    • IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
    • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

 

  • Stable and reliable
    • Low power consumption, galvanized steel casing.
    • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
    • CCC, CE, FCC, RoHS.
    • The user-friendly panel, it can show the device status through the LED indicator of PWR, Link, PoE.
    • Plug and play, no configuration, simple and convenient.
    • Support desktop and 1U/19-inch cabinet installation.
    • Unmanaged model, plug and play, no configuration, easy to use.

Specification

Model SP-1622P
Interface Characteristics
Fixed Port 16*10/100Base-TX PoE ports (Data/Power)

2*10/100/1000M uplink RJ45 ports (Data)

2*1000M uplink SFP slot ports (combo port)

Ethernet Port 10/100Base-T(X) ,10/100/1000Base-T automatic detection, full/half Duplex MDI/MDI-X adaptive
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP (≤100 meter)

100BASE-TX: Cat5 or later UTP (≤100 meter)

1000BASE-T: Cat5e or later UTP (≤100 meter)

SFP Slot Port Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable/ Distance Multi-mode: 850nm /0 ~ 550M, single-mode: 1310nm /0 ~ 40KM, 1550nm/0 ~ 120KM.
Chip Parameter
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T

IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T

IEEE802.3z 1000Base-X, IEEE802.3x

Forwarding Mode Store and Forward (Full Wire Speed)
Switching Capacity 14.8Gbps (non-blocking)
Forwarding

Rate@64byte

5.36Mpps
MAC 16K
Buffer Memory 4M
Jumbo Frame 10K
LED Indicator Power: PWR (green), Network: Link, Link/Act (yellow), POE: PoE(green), Speed:1000M (green)
PoE & Power Supply
PoE Port Port 1 to 16 IEEE802.3af/at @ POE
Power Supply Pin Default 1/2 (+), 3/6 (-) Optional: 4/5(+),7/8(-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input Voltage 250W(AC100-240V)
Power Consumption Standby<15W, Full load<250W
Power Supply Built in power supply.

AC100~240V 50-60Hz 4.1A

Physical Parameter
Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing
Storage TEMP / Humidity -40~+75°C, 5%~95% RH Non condensing
Dimension (L*W*H) 440*290*44.5mm
Net /Gross Weight <2.8kg/<3.4kg
Installation Desktop, wall-mounted,19-inch 1U cabinet
Certification & Warranty
Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30
Certification CCC, CE mark, commercial; CE/LVD EN60950; FCC Part 15 Class B; RoHS
Warranty 2 years, lifelong maintenance.

SP-1622P-Datasheet

Download